Cherry Mobile Flare P1 Mini Firmware / Stock Rom

Cherry Mobile Flare P1 Mini Firmware
CM Flare P1 Mini Android Marshmallow 6.0 
Here is the updated official firmware for your Cherry Mobile Flare P1 Mini, This is SPD Chip so the firmware is PAC file, ready to flash in free software like ResearchDownload or Upgrade Download.

NOTE: CM Flare P1 Mini is different to Flare P1 Plus




Why we flash a new firmware for Cherry Mobile Flare P1 Min? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:
  • Cherry Mobile Flare P1 Mini Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Cherry Mobile Flare P1 Mini Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Cherry Mobile Flare P1 Mini Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Cherry Mobile Flare P1 Mini boot loop.

Download Cherry Mobile Flare P1 Mini Firmware / Stock Rom
Password: 
moxxxgsmsandwich

Thanks and credit to MOXXX


Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.


Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start


  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it took more than 15 minutes then I suggest to perform a hard reset.

26 comments:

  1. IEEXTRACT ko pa po ba yung Rar PARA makita ko yung pac file..??

    ReplyDelete
  2. pwede ba par mag flash ng SPD chip sa Sp Flash tool..

    ReplyDelete
  3. sabi kase dun sa NEED ROM ehh..MT6580 EHH sabi naman dito SPD CHIP DAW??PWEDE BA

    ReplyDelete
    Replies
    1. yung sa P1 mini kasi is SPD kaya Pac file ang firmware nya at hindi pwedeng sp flashtool ang gammitin, dapat research/Upgrade Download

      Delete
    2. boss bakit install failed pag mag install ako sa spd sci? x64 bit po ung os ko.

      Delete
  4. boss bkit failed user cancel lumalabas

    ReplyDelete
    Replies
    1. Select mo sa setting ng sp flash tool yung format all + download

      Delete
  5. MGA SIR BAKIT PO BIN SIZE IS SHORT SABI NYA

    ReplyDelete
  6. MGA SIR BAKIT PO BIN SIZE IS SHORT SABI NYA

    ReplyDelete
  7. guys ang combination ng p1 mini ay volume up at power button para maflash nyo sya

    ReplyDelete
  8. Hoy cherry mobile p1 mini ko ayaw magstart laging hanggang cherry mobile lang ayaw talaga nyang magstart patulong naman po������

    ReplyDelete
    Replies
    1. Ano po ba sira dati bago nyo iFlash? paki Try iSelect ang Format All + Download sa Spflashtool

      Delete
  9. Kahit ireset ko sya ayaw talagang magstart ng phone ko

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
  11. Guys, VOLUME UP + POWER BUTTON ang gumana para sa CM Flare P1 Lite ko.
    SPD_Upgrade_Tool_R4.0.0001
    Windows 10 Home x64
    Salamat po mga Master!

    ReplyDelete
    Replies
    1. Salamat sa Feedback mo bro, eedit ko sana pero P1 Mini eto :D Malamang same sa p1 mini

      Delete
  12. paps May problema ko Ulit MTP DEVICE FAILED!!WHOo!!TUlungan mo ako Paps..

    ReplyDelete
    Replies
    1. siguraduhin mong naka-off ung phone bago i-connect sa pc..

      Delete
  13. Ayaw GUmana DIn sa UPgrade Download??

    ReplyDelete
  14. flashed it just now..white screen display:( any idea for a possible solution?

    ReplyDelete
  15. The data packet with type (0*96) retruned was misformatted..bakit po naging ganito ang progress?

    ReplyDelete