Cherry Mobile FLARE J2S SPD SP7731GEA Firmware (.pac)

cherry mobile flare J2S SPD spreadtrum
Cherry Mobile Flare J2S SPD Android 6.0
Firmware Download link for Cherry Mobile Flare J2S Spreadtrum Chipset is here. This is the latest stock rom and fresh back up from untouched CM Flare j2s.


Why we flash a new firmware for Cherry Mobile FLARE J2S? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:
  • Cherry Mobile FLARE J2S Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Cherry Mobile FLARE J2S Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Cherry Mobile FLARE J2S Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Cherry Mobile FLARE J2S Too Many Pattern Attempts or forgot password -   This is just an alternative solution if you cannot hard reset your android phone.
  • Cherry Mobile FLARE J2S boot loop.



You should understand that Cherry Mobile Flare J2S has a two different Chipset. MTK Mediatek Chipset and SPD Spreadtrum Chipset.

How to indentify Android device chipset

  1. Go to settings>about phone
    Cherry Mobile Flare J2s SPD About Phone
  2. Check at the above image you will see a sc7731g that means that your android phone has SPD Spreatrum chipset.

    If your android phone is MTK MediaTek Chipset, You can go to Cherry Mobile Flare J2S MTK Mediatek Stock Rom


Download Cherry Mobile FLARE J2S SPD Stock Rom(Mediafire for RD)
Download Cherry Mobile FLARE J2S SPD Stock Rom for CM2

NOTE: Please select only one link above. Don't download the link for CM2 unless you have a CM2 box.

For the instruction of how to flash your Cherry Mobile FLARE J2S SPD, just follow the instruction below.




Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start


  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

10 comments:

  1. There is no pac file .
    The one in the file i diwnloaded is .pac.sc ( sc file )

    ReplyDelete
  2. I think the rom i was downloaded in this site is not correct

    ReplyDelete
    Replies
    1. yeah, there are 3 given link above, choose the first or second link for ResearchDownload/UpgradeDownload.

      Delete
  3. All of the links given are .pac.sc (sc file).
    Wheres the .pac file sir?

    ReplyDelete
  4. same here .pac.sc ?seems it was a box file ?

    ReplyDelete
  5. Replies
    1. Please read yung note below ng download link. yung pang cm2 kasi nadownload mo.

      Delete
  6. master it says write flash failed what will I do?? plzzz. help

    ReplyDelete
  7. Доброго времени всем кто здесь сидит неужели я нашёл прошивку сейчас прошиваю надеюсь всё будет норм выложу на канале!!!

    ReplyDelete
  8. yung sa step 5 .. talagang eh press lang po yung volume up at tsaka down dipo ba sya eh hold? ... tlagang black screen lang po dipo sya papuntahin sa factory mode? yung eh hold yung power at tsaka volume up or down??

    ReplyDelete