Cherry Mobile FLARE J1S B Firmware / Stock Rom

Cherry Mobile Flare J1s Android Marshmallow 6.0

Pac File Firmware / Stock Rom for Cherry Mobile Flare J1S B is here. Tested and proven working with pac file.. flash using UpgradDownload just follow the Intruction below.

NOTE: Cherry Mobile FLare J1S B is different to Cherry Mobile Flare J1S C and Cherry Mobile FLare J1S A

Why we flash a new firmware for Cherry Mobile FLARE J1S? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:

• Cherry Mobile FLARE J1S Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
• Cherry Mobile FLARE J1S Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
• Cherry Mobile FLARE J1S Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
• Cherry Mobile FLARE J1S Too Many Pattern Attempts or forgot password -   This is just an alternative solution if you cannot hard reset your android phone.
• Cherry Mobile FLARE J1S boot loop.

Download Cherry Mobile FLARE J1S Stock Rom
Password:E21

Thanks and credit to  evans21 for taking time to back up and upload.

For the instruction of how to flash your Cherry Mobile FLARE J1S SPD, just follow the instruction below.

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
   - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
   
   
3. Then run DPInst.exe. Just click next until it finish installing.
   

NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
   NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
   
3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
   
4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
   
5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable while holding the volume keys. If you see a a progress bar release holding, then it means that it is successfully connected. if not, then try step 5 again.
   
   
   
   
6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
   

After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

Cherry Mobile Flare J1S C is now Available to download