Oppo R831k Firmware / Stock Rom

OPPO R831k Firmware aka Oppo Neo 3 Stock Rom Download. A solution for hang on logo, vibrate only after flash, dead boot, nand flash was not detected and other related software problem This is MT6572 MTK Chipset that can be flash in SP Flash Tool just browsing the scatter file.

Things to know more about Oppo Neo 3

Oppo Neo 3 R831k has encounter most software problem and also in the hardware parts which is the EMMC IC. The EMMC component is the common reason for oppo neo 3 to experience dead boot or vibrate only after flashing. So here is the safe solution for you to flash safely your phone to avoid those problem.

How to know if my Oppo Neo 3 has EMMC Problem

There are no specific way to know exactly but according to our experience is by trying to Hard Reset (Wiping Data) your phone and it failed instead of successful. is you try to hard reset and cannot continue it means there is problem in your EMMC. You can still try all the flashing method below.

For other software problem like Infected Virus (Aka monkey Virus) or other software problem, you can perform the safe method of flashing.

---

Download Firmwares, Drivers and SP Flashtools

In or there to continue, you need to download first all the things needed in flashing. Download the following files:

• MTK Drivers
• Oppo Neo 3 R831k Firmware
  Password: www.gsmsolutionph.com
  Credit and thanks to Toperz
• and SP Flash Tool v5.1352.01

Safe Way to flash OPPO R831k Firmware

In order to flash, make sure you already installed the MTK Drivers and extracted the firmware. Also you must be USE ONLY Smart Phone Flash Tool v5.1352.01.

1. Open flash_tool.exe.
2. Click Scatter-loading.
3. Browse MT6572_Android_scatter.txt where you extracted the firmware then Click Open.
4. Select MOTA SIU Like then the Smart Phone Flash tool will automatically check BOOTIMG, RECOVERY, and ANDROID. Follow the screenshot below.
   
5.  Remove the the battery of your phone then;
   - Click Download in SP Flash Tool.
   - Press Volume Key in your phone, then Connect USB Cable then Insert battery while pressing Volume.
   - If you see progress bar in SP Flash Tool, Release Volume then wait until finish flashing.

After Flashing, Make sure to Hard Reset.

How to Hard Reset Oppo R831k

1. Turn off Your phone.
2. Press Volume UP or Down then Press Power Button until display the Select Language.
3. Use Power button Select English Language.
4. Select Wipe Data and Cache.
5. Then Confirm wipe.

How to Revive R831k Deadboot or Vibrate Only

After several times of flashing Oppo r831k, most of them became Deadboot but detected or it vibrate only after pressing power button. Here is the 90% solution.

1. Open flash_tool.exe.
2. Click Scatter-loading.
3. Browse MT6572_Android_scatter.txt where you extracted the firmware then Click Open.
4. Now Select Format All + Download.
5.  Remove the the battery of your phone then;
   - Click Download in SP Flash Tool.
   - Press Volume Key in your phone, then Connect USB Cable then Insert battery while pressing Volume.
   - If you see progress bar in SP Flash Tool, Release Volume then wait until finish flashing.
6. Hard Reset after flash.
   

Conclusion

Oppo neo 3 has a common issue in software. The above flashing procedure is the best way to fix those problem. If it fails, then there might be problem in Hardware. in that case, we strongly recommend to consult your nearest trusted technician for help. If you have some technical knowledge and confident to flash then you can try our tested Oppo R831k Firmware.