Cherry Mobile Flare J1 2017 Bypass FRP + Stock Rom

You might one for those looking for firmware of CM Flare J1 2017, here it is and we also give you a tricks to bypass your frp or google account through flashing. this CM Flare J1 2017 has a Android 6.0 Marshmallow operating system and spreadtrum chipset that can be flash through Research Download.

To flash the firmware or stock rom of CM Flare J1 2017, we need a pac file for this model.

Download Cherry Mobile Flare J1 2017 (Pac File)
pass.antgsm_paranaquechapter

Before anything else, we recommend to back up first all your important data like contacts, photos, sms, notes, etc. performing below procedure will erase all your data including third party installed apps. make sure also that your flare j1 2017 should charged atleast 20%. Then download the above firmware.

Install SPD driver first, you can follow instruction below then Open ResearchDownload.exe then load a pac file.

How to Bypass FRP in Cherry Mobile Flare J1 2017

1. In ResearchDownload Click on Settings, Select Flash Operations tab.
2. In Erase Flash, Check Erase All Flash then click ok.
3. Now click Start Downloading.
4. Turn off your phone and press Volume Up the Insert USB Cable to PC.
5. Now wait till finish downloading and you will see Passed.

In the above procedure, your flare s5 mini frp lock will be removed. and same also to Flare J1 2017 to be summarize, your old firmware will erase the flash new stock rom. below instruction is a normal instruction in flashing spreadtrum phone.

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
   - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
   
   
3. Then run DPInst.exe. Just click next until it finish installing.
   

NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
   NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
   
3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
   
4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
   
   
5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
   
6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
   

After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.