Cherry Mobile Flare S5 Mini FRP (Google Account) + Firmware

Flare S5 Mini FRP
Cherry Mobile Flare S5 Mini 6.0 Marshmallow
You might one for those looking for firmware of cherry mobile s5 mini, here it is and we also give you a tricks to bypass your frp or google account through flashing. this flare s5 mini has a Android 6.0 Marshmallow operating system and spreadtrum chipset that can be flash through Research Download.

To flash the firmware or stock rom of flare s5 mini, we need a pac file for this model.

Download Cherry Mobile S5 Mini Stock Firmware (Pac File)
Firmware Password: moxxxgsmsandwich

Experience White screen after flash?? solution here

Before anything else, we recommend to back up first all your important data like contacts, photos, sms, notes, etc. performing below procedure will erase all your data including third party installed apps. make sure also that your flare s5 mini should charged atleast 20%. Then download the above firmware.

Install SPD driver first, you can follow instruction below then Open ResearchDownload.exe then load a pac file.

How to Bypass FRP in Cherry Mobile Flare S5 mini

  1. In ResearchDownload Click on Settings, Select Flash Operations tab.
  2. In Erase Flash, Check Erase All Flash then click ok.
  3. Now click Start Downloading.
  4. Turn off your phone and press Volume Up the Insert USB Cable to PC.
  5. Now wait till finish downloading and you will see Passed.
cherry mobile Flare s5 mini frp bypass

In the above procedure, your flare s5 mini frp lock will be removed. to be summarize, your old firmware will erase the flash new stock rom. below instruction is a normal instruction in flashing spreadtrum phone.



Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start
  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

Other link of Flare S5:

Bypass FRP in Cherry Mobile Flare S5
Bypass FRP in Cherry Mobile Flare S5 LITE DTV
Bypass FRP in Cherry Mobile Flare S5 MAX
Bypass FRP in Cherry Mobile Flare S5 MINI

47 comments:

  1. paano po ba eroot ang cm s5mini ?

    ReplyDelete
  2. nag white screen po ung phone pero naririnig ko ung cherry mobile tone sa boot up. and pag inantay ko ung whitescreen mawala, nagdadark sya meaning nandun na sya sa menu ng setupwizard pero naka white lang

    ReplyDelete
    Replies
    1. sa tingin ko kung ganya, hardware problem po ang may problem, yung LCD nya.

      Delete
    2. Hi sorry sa previous reply, may naka experience na din palang same issue sayo na nag white screen ang cherry mobile flare s5 mini nya after flash kaya naman nilagay ko na yung solution, http://gsmsolutionph.blogspot.com/2017/04/cherry-mobile-flare-s5-mini-white-screen-solution.html

      Delete
    3. huwow., really? oh my gosh., i cant believe it.any longer., how long does it takes for you to realize how much i love you., i cant live my life without you., please., release me let me go., for i don't love you anymore., hae jaf l a iee., bo ya., ni mo.,,,,,,,,

      Delete
  3. yung akin po dipo ma detect
    ng upgradedownload tools help pls

    ReplyDelete
  4. Ang sabi sa akin ehh ano po too small daw ang size

    ReplyDelete
    Replies
    1. something wrong siguro sa pag Download ng file sir. try to download again.

      Delete
  5. Sir, help . kapag pinepresd ko yung up down volume button. ganun parin. nagboboot sa android nya. laging unplugged sa SPD upgrade tool

    ReplyDelete
  6. Sir, help . kapag pinepresd ko yung up down volume button. ganun parin. nagboboot sa android nya. laging unplugged sa SPD upgrade tool

    ReplyDelete
  7. Pano po pag halos lahat nag error pwera lang sa system boot at recovery? And kapag chineck yung erase all flash walang signal?

    ReplyDelete
    Replies
    1. Working ang firmware na ta sa mga mas lumang Flare S5, Para sa mga nakaka Experience ng error, paki try ang firmware na to :) http://gsmsolutionph.blogspot.com/2017/04/cherry-mobile-flare-s5-mini-white-screen-solution.html

      Delete
    2. Flinash ko na po yung white screen solution pero walang signal ? ano pwedeng gawin?

      Delete
    3. para sa naka experience ng no signal sa CM Flare S5 mini nila after flash, kelangan nyo lang po iWrite ng NVRam gamit ang CM2 or Miracle Box http://gsmsolutionph.blogspot.com/2017/04/cherry-mobile-flare-s5-mini-white-screen-solution.html

      Delete
  8. Nag eerror po siya sa pag extract ng file? bat po ganun?

    ReplyDelete
    Replies
    1. Corrupt or wrong password po nakalagay

      Delete
    2. we recommend to redownload and use 7zip as extractor.

      Delete
  9. BAKIT PO AYAW MADETECT YUNG PHONE KAHIT NA INSTALL NAMN LAHAT NG DRIVERS SALAMT PO

    ReplyDelete
  10. Good Afternoon Sir. Bakit wala po yung packet file (.pac). Di po kasama sa mga dinownload ko po. Thank you very much. More blessings. God Bless.

    ReplyDelete
  11. Salamat po sa tut.. Same problem po sa taas pero sa bang unit po ngyari sa cherry mobile superion scope3g blackscreen po pero tumutunog po.. Wlang nakkitang display ano po kaya problema salamat po

    ReplyDelete
    Replies
    1. LCD po yan kung ganun, papalitan mo nalang sa pinaka malapit na tech jan

      Delete
  12. dipo gumagana yung driver sakin ,. nag fafail yung installation wizard ko

    ReplyDelete
  13. master, thank you very much!!! 100% working !!!

    ReplyDelete
  14. after ko ma flash bakit may google account na hinihingi? old google account daw? ano solusyon dun?

    ReplyDelete
    Replies
    1. d mo lang naFollow maiigi bro, flash mo lang ulit the make sure sa flash operation, checked dapat yung Erase All Data

      Delete
  15. pwede po ba ito sa cherry mobile iris model..

    ReplyDelete
  16. ndownload ko n po lahat ng file .pac flash tool usbvcom driver paano po iconnect ung cherry mobile flare s5 mini for flashing sa pc

    ReplyDelete
  17. ang problem po ksi ng phone po model:cherry mobile flare s5 mini yung pag factory reset ko at wipe data ko pagkatapos ung pag reboot ko sa phone sa set up ng language skip ko lahat pag dating sa choose wifi nka disable ung skip po pls help

    ReplyDelete
    Replies
    1. Naka lock sa google account yan, Follow mo lang yung Instruction sa taas para sa pag bypass.

      Delete
  18. sir tanong ko lang kasi hindi dumederetso yung pag boot.. pag volume up or down ko lumalabas logo tas charging 10 times ko na po ginawa walang progress...sa PAC File po ba may old version ng firmware ba tayo kasi pag yung older yung ginagamit ko pag open ko yung PAC file october 2016 bin's packet is too small maybe it has been distructed! ganun po 5 times ko pong neredownload..

    ReplyDelete
    Replies
    1. yung pag connect lang may problem wala sa pac file, check mo mabuti kung naka install driver

      Delete
  19. Master tanong ko lang po pano po mabypass ung google account locked na phone? Cm flare s5 po ung saken

    ReplyDelete
  20. panu ba gamitin ang pag revive ng S5 gamit ang recovery yung gamit sd card

    ReplyDelete
  21. Need ng firmware na pang sd card yun. Unfortunately wala tayong firmware na available.

    ReplyDelete
  22. _REPARTITON_ FAILED UNKNOWN DEVICE

    ReplyDelete
  23. boss ung pag tanggal ng FRP dun sa flash operation ayaw ma click checked cant be empty naka lagay.

    ReplyDelete
    Replies
    1. load mo yung file then follow mo yung instruction sa taas yung bypass frp

      Delete
  24. bin file to small? cant add the pac file on the flash tool

    ReplyDelete