Cherry Mobile Razor 2 Firmware / Stock Rom Update

12/21/2016 ,
CM Cherry Mobile Razor 2
Cherry mobile Razor 2
Hi, Here is a firmware that you are looking for Cherry Mobile Razor 2, it has a Qualcomm Chipset and android 4.3 Jelly Bean operating system.
Before continue, take note that flashing this can delete all your files in internal storage like contacts, messages, photos, and all installed third party application, before continue, we recommend to backup first all your important data.

Download Cherry Mobile Razor 2 Firmware

Download Cherry Mobile Razor 2 Firmware Flash via SD Card

Download Smart Phone Upgrade Tool.zip

Flashing this qualcomm snapdragon razor 2 is pretty hard and thrilling and if you are not knowledgeable in flashing or upgrading android phone, then we advice to go to your nearest cellphone technician. but if you are hard headed like me, then you can follow this instruction,

First is let's upgrade through Smart Phone Upgrade Tool 
Make sure the your phone battery charged atleast 20% and follow this steps;
1. Extract the software file (If it is in zip file)
2. Run Smart Phone Upgrade Tool
3. Take off the unit’s battery.
4. Press the volume up and volume down simultaneously while connecting the unit to the PC using the micro USB cable. 
While pressing volume up and down, connect the USB cable.
5. Click Refresh port. 
6. Click Browse, and look for the software. Click the version folder then select any of the three. 
7. Click Start All.
8. After successfully downloading, you can now disconnect the unit to the pc. Put on the battery. And turn the unit on. 
Smart phone upgrade tool

9. Its best to reset the phone after upgrade. 

Most of the people who tried flashing the smart phone upgrade tool experienced a error while flashing or Update Fail, I hope that you are not one of them, the solution is you can try the other flashing method and that is flash using a SD Card, to do that, follow a simple instruction below.

1. First download a  Cherry Mobile Razor 2 Firmware Flash via SD Card then copy the zip file to SD Card Directory.
2. Go to Recovery Menu (By pressing Power Button + Volume Up I think)
3. Select Update from SD Card.
4. Select a zip file you copied to SD card.
5. Wait until finished.

For more help or feedback you can comment or message us on Facebook.

Post a Comment

20 comments:

  1. AnonymousJanuary 17, 2017 at 11:29 AM

    i am stuck on 87% flashing. . what could be the problem? and in sd installation it always failed.. any idea?

    ReplyDelete
  2. UnknownMarch 11, 2017 at 5:02 PM

    ako 1 percent palang failed na pano ba un? unit ko dead

    ReplyDelete
  3. AnonymousMarch 12, 2017 at 6:34 PM

    any of the three po xml files po? after installing one of them it just shows the logo then the screens blacks out already tried all 3 of them still doesnt work even download is successful

    ReplyDelete
  4. AnonymousApril 3, 2017 at 10:36 PM

    How To Install USB Drivers?

    ReplyDelete
    Replies
    1. Pilot VirApril 4, 2017 at 8:42 AM

      Your computer must be connected to Internet and it will be automatically installed upon inserting usb cable.

      Delete
    2. UnknownApril 4, 2017 at 7:20 PM

      OK Na Dinownloadan Ko Na Ng Ibang Usb Drivers Kaso Hanggang 1% lang Failed Na Ano Po Dapat Ko Gawin??

      Delete
  5. UnknownApril 17, 2017 at 12:23 AM

    success ako pag flash boss ty

    ReplyDelete
  6. UnknownApril 25, 2017 at 2:26 PM

    Nagsuccess naman po yung mga procedure. Pero hindi pa din po naayos. ang error po ay "E:failed to mount /data (Invalid argument)

    ReplyDelete
  7. AnonymousJune 19, 2017 at 4:19 PM

    any update on this post??

    ReplyDelete
  8. UnknownJuly 29, 2017 at 2:15 PM

    please pa help naman po. laging stock sa 40% ilan beses ko na sinubukan

    ReplyDelete
  9. UnknownOctober 17, 2017 at 7:17 PM

    Sir, saan po ba makikita kapag na browse na sa smart phone upgrade, hindi ko po nakita yung Stock rom na xml/raw ganyan po.

    ReplyDelete
  10. ISPIYAHNovember 3, 2017 at 2:44 AM

    sir. after ko gnawa ang procedure mo. naging success naman sya. kaso lng. after nun. nd na sya magopen. if iconnect ko sa pc. dalawa natetect nya. preloader at mediatek da usb port. taz on/off lng sya. pano to ayusin?

    ReplyDelete
    Replies
    1. Pilot VirNovember 3, 2017 at 6:09 PM

      awts surry bout that bro. need na ng other flash tool nyan or try mo ulet. I suggest na punta mo sa tech nalang instead na bibili ng other flasher. sa mga nagbabasa. Try first yung SD Flashing para safe.

      Delete
  11. UnknownDecember 18, 2017 at 3:18 PM

    Sir. nagsuccess na ko once or several times dito but now. kapag nandun nako sa aupgrade tool then connectng my phone to pc. no batts of course. naglu loop lang sya sa razor 2 logo then shut down then repeat. di na syaa na dedetect din pinepress ko din naman yung volume up and down ng sabay.

    ReplyDelete
  12. UnknownFebruary 22, 2018 at 9:23 PM

    sir nagawa mona ba ung razor mo? gnyan din naeencounter ko now e .

    ReplyDelete
  13. darkieAugust 29, 2018 at 8:32 PM

    pwede ba to sa encryption unsuccessful error razor 2?

    ReplyDelete
  14. UnknownNovember 14, 2018 at 4:27 PM

    sir flashtool po ba to???

    ReplyDelete

Subscribe to: Post Comments ( Atom )