Tablet MT6572 M706-MB-V7.2 Tested Firmware

Here is the tested firmware for M706-MB-V7.2 clone tablet. flash this firmware for those hang in logo or other issue. as many firmware I tried, most of them doesn't work to this tablet, and then when I tried this firmware, this is the only one works in the four firmware I tried. Download it below, tested firmware.
MT6572 M706-MB-V7.2 firmware
MT6572 M706-MB-V7.2 by MOXXX

Download M706-MB-V7.2 MT6572 Firmware

Password: moxxxgsmsandwich

Flashing above firmware can be fixed some of common software problem, In my case, my tablet is infected with virus, there are always popup ads and some application auto installed, I tried to hard reset but it doesn't work so no choices but to flash new firmware, here are the following common problem of android tablet that can be fixed through flashing new firmware.

  • Monkey Virus / Infected Virus
  • Hang on Android logo
  • Forgot password/pattern or email - this is just an alternative to hard reset
  • Slow or hang
  • unfortunately error
and some other reason, please note that  flashing new firmware can delete all your data in your tablet, performing a back up to important files is recommended.

flash this firmware using CM2, NCK or SP Flashtool.

Since SP flashtool is the free flasher, heres is the tutorial on


How to flash Android phone using SP Flash tool

What we need?
  • PC
  • Firmware/ROM, SP Flashtool and MTK Drivers
  • USB Cable
  • Smartphone with 30 to 50 percent battery charged


Driver Installation

Flashing phone need to install driver first in order to connect and to be able to flash firmware, we will be install MTK driver in to different way, choose only one by using Auto Installer Drivers or MediaTek USB VCOM drivers. 

Install Driver using Auto Installer Driver

  • After you download and extract, open the folder and you will see Install.bat 
  • Run and it will appear Windows Security window
  • Click Install this driver software anyway 
  • It will appear many times and just click the same button. 
MTK Driver Auto Installation

Wait for CMD window to display Install complete that indicate that driver installation is successful.


Install Driver Using MediaTek USB VCOM drivers

To manually install MediaTek USB VCOM drivers, you can follow this video:



Flashing Stock Rom in SP Flash tool

  1. Download Latest SP Flash tool here and extract to your desired location.
  2. Open the extracted file folder and run flash_tool.exe
  3. On Scatter-loading file, click the choose button to browse for the Android_Scatter.txt
    flash tool choose file
  4. Follow the screenshot below in choosing android scatter file.
    Note: The given screenshot scatter file is for Starmobile UP firmware with MT6582, this may different to your downloaded firmware depend on what model of your phone. this is just a guide on how to flash Mediatek smartphone.
    SP flash tool choose scatter
  5. After you select and load scatter file, either you see unchecked file, if you are not sure what you are doing, I suggest to Do not change anything. In below screenshot, the default CACHE and USRDATA is uncheck, if yours is checked, Just leave it default and do not unchecked.

  6. In flash tool Select Download Only Then click Download button
    In your phone turn off first, or remove battery (if removable) because turn off is a must.
    Then Press Volume up or Down or you can press them both Then insert USB Cable. If you see a Red Progress bar then the phone is detected.
    if it continue to Yellow Progress bar then proceed to step 7.
    sp flash tool phone detect
    6.1 Some phone that has a Virus infected encounter this warning;
    PMT changed for the ROM; it must be downloaded. If you don't see this warning skip this and proceed to step 7.
    to solve this, just follow the suggestion, Please Select "Format All + Download" Scene and try again the step 6.

    SP flash tool PMT changed for the ROM

  7. You will see a yellow progress bar, that means it start downloading. Just put down your phone because it may take few minutes.
    WARNING: Do not unplug or disconnect during this operation.SP Flash tool Downloading
  8. And finally, it will popup a Download OK,  that means the flashing new firmware is successful.
    SP flash tool download ok
    For Video tutorial, you can Watch in YouTube.
    Now that you flash your new firmware, restart your phone and you can now setup settings and install your desired application. if you encounter some problem, please comment and we will help you.
    NOTE: Starting up for the first time may took long.

Troubleshooting

FOR INVALID IMEI or Null IMEI

After you flash new firmware and try to dial *#06# to check your IMEI you will see INVALID or null Just follow How to Fix/Solve Invalid IMEI in safest method.

21 comments:

  1. flash file kaj korena logo hang

    ReplyDelete
  2. Is there any method to know whether the said firmware is compatible to a different device? What i mean is i'll try to flash a Samsung firmware to cherry mobile, for example. Is it possible somehow?

    ReplyDelete
    Replies
    1. As long as the same Board ID, it should be compatible, much better if you try

      Delete
  3. Thankx Password is

    moxxxgsmsandwich

    ReplyDelete
  4. mga tikalon ..firmware nyo,.,.,sarado nyo ni nga thread .,.,.,.,.kuruya

    ReplyDelete
  5. Now we know who the ssebnile one is here. Great post! ipad photoshop

    ReplyDelete
  6. Do you mind if I quote a couple of your posts as long as I provide credit and sources back to your website? My blog is in the very same niche as yours and my visitors would genuinely benefit from a lot of the information you provide here. Please let me know if this okay with you. Thank you! ipad psd

    ReplyDelete
  7. you possess a excellent weblog here! do you need to cook some invite posts in this little blog? web design agency san francisco

    ReplyDelete

  8. your password is wrong please put the password

    ReplyDelete