Myphone My81 Firmware / Stock Rom (Pac File)

Myphone My81 firmware stock rom
Myphone My81 Android 5.1 Lollipop
Here is the tested firmware for your Myphone My81, this is original stock rom backup to fix common software problem, follow the flashing instruction below.


Why we flash a new firmware for Myphone My81? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:
  • Myphone My81 Infected Virus - Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Myphone My81 Unfortunately Error - This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Myphone My81 Stuck or Hang in Logo - The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Myphone My81 boot loop.

Download Myphone My81 Firmware

password: MY81_MARLO123

Thanks and credit to Marlo123

NOTE: Myphone My81 is Different to Myphone My81 DTV

Flashing Stock Rom To Android Smartphone

Install Spreadtrum Driver

  1. First download SPD SCI Android USB Driver V4 by jungo the complete driver for Spreadtrum.
  2. After download, extract anywhere  in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
    - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
    System Type 32-bit operating system
  3. Then run DPInst.exe. Just click next until it finish installing.
    SCI-android-usb-driver-jungo-v4 driver
NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.

Flash Pac file Stock Rom

  1.  Download the SPD_Upgrade_Tool_R4.0.0001 latest version, or SPD_Upgrade_Tool_R299015 lower version. Then extract to your desired location.
  2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
    UpgradeDownload.exe
  3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.
    UpgradeDownload Load Packet
  4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
    UpgradeDownload Start Downloading
  5.  Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
    UpgradeDownload start


  6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

28 comments:

  1. Hey! It worked on my device. Thank you for your work! :)

    ReplyDelete
  2. THE PASSWORD IS NOT WORKING!!!!!

    ReplyDelete
    Replies
    1. Extract using winrar or 7zip then manually type password, dont copy paste.

      Delete
  3. work on 64bit os???

    ReplyDelete
    Replies
    1. Hello sir, did you try it?, mine has error, it says "FAILED:USER CANCEL"

      Delete
    2. More detail on error sir?, try select format all + download

      Delete
  4. it says, STATUS: UNPLUGGED FAILED:USER CANCEL everytime i start download..
    i dont know whats going on.. i think 32bit would do the work but i dont have any 32bit pc :( or the exact sc7731 driver??? im using SC77xx driver BTW

    ReplyDelete
    Replies
    1. there might be problem in drivers, or try to use other usb port or other usb connector

      Delete
    2. Which driver would you recommend? i tried all drivers. still have no luck :(

      Delete
    3. Depends on your system but you can try this http://www.4shared.com/rar/Rb77PChzce/spd_SCI-android-usb-driver-jun.html

      or this https://www.4shared.com/rar/CBjURgiyca

      Delete
  5. bakit di sya na reread sa pc ? 64bit os. di ko sya ma flash

    ReplyDelete
    Replies
    1. Not compatible yung driver ata sa 64bit, please try at 32bit

      Delete
    2. hanap k po 64bit compatible

      Delete
  6. sir inquire lang.. paano kung laging reconnecting ang phone.. ganun kase ang nangyayare sa akin pag ikinu connect ko na sa desktop ang phone

    ReplyDelete
    Replies
    1. Make sure na nakainstall yung driver. tapos tamang timin sa pag salpak ng usb para mag connect

      Delete
  7. man it works!!! thank you!

    ReplyDelete
    Replies
    1. redownload mo lang baka corrupt yung pagdownload or manually type password

      Delete
  8. nasan ang mga hard ware na idodownload?

    ReplyDelete
  9. WALNG KWENTA !!! HINDI GUMAGANA BWISET !!!!!!!!!!!!!!!!!!!

    ReplyDelete
  10. sa akin po BKF Phacheck Status: Finished Progress: Failed Incompatible partition, ano ang paraan dyan master?

    ReplyDelete
  11. sir ma iinstall ba to kahit cp lang gamit?

    ReplyDelete
  12. Sir Good Day! pwede po mag request pwede po ninyo i update yung firmware yung last version na nya? or post a zip file para doon nalang kukunin sa sd card yung last update neto. may site kasi na meron silang v.1.10 kaso di madownload. baka naman pwede boss

    ReplyDelete
  13. success yung yag load ng firmware. pero pag on mo sa cellphone hanggang logo lang. baka pwedeng patulong naman jan boss

    ReplyDelete